Adjusting The Focus - Canon FS 3.6 User Manual

Adjusting the Focus

The focus mechanism of the lens can be switched between autofocus and manual
focus for scanning. Autofocus is adequate for most applications, but you may
occasionally wish to use the manual focus if the image is slightly blurred because
the film is warped or curled.
Click the [Settings] menu and select
[Focus].
Focus Settings Dialog
Select [Manual Focus] and drag the slider or input a value to change the setting.
• If the image in the film itself is out of focus, there is little chance of
obtaining a sharp, focused image by adjusting the focus setting.
• If the image in the film itself is out of focus, you can make it less noticeable
by adjusting the contrast and applying the sharpen effect.
Focus Settings Dialog
Click the round button to select [Autofocus]
or [Manual Focus].
If you select manual focus, drag the slider or input a
value between 1 and 9 to adjust the focus.
Clicking the autofocus button causes the autofocus to
operate and display the focal setting by the position of
the slider and the value in the box.
72