Procedures For Setting The Output Resolution - Canon FS 3.6 User Manual

Procedures for Setting the Output Resolution

Select the output resolution best suited to your intended print and monitor sizes.
Select a setting by right-clicking the settings display area, highlighting an option
with the mouse cursor and clicking it. When the menu disappears, the new value
will appear in the settings display area.
Right-click the settings display area
Highlight an option and click
The current selection will have
a check mark beside it
To change the setting with the output magnification box at the top of the preview
window, set the units to [%] and click the up or down arrows or input a value
directly into the box.
Output Magnification Box at the
Top of the Preview Window
Click here and
select [%].
• Changing the scan resolution enables you to select [Custom] in the output
magnification pop-up menu.
Step 2 • Scanning
Selecting the [Custom] option
displays the Custom Magnification
Settings dialog, allowing you to
directly input a custom value.
Enter a value directly in this box
Raises the magnification
Lowers the magnification
35