Table of Contents
Advertisement
Installing software over the network
3
Connect your machine to the network with a network cable.
4
Turn on the machine.
5
From the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
6
Click the
icon in the SetIP window to open the TCP/IP configuration
window.
Enter the machine's new information into the configuration window. In
7
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine's MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 53) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
8
Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.
8
Windows
• Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7).
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 17).
• You can install the printer driver and software when you insert the
software CD into your CD-ROM drive. For windows, select the printer
driver and software in the
1
Make sure that the machine is connected to the network and powered
on. Also, your machine's IP address should have been set (see "Setting IP
address" on page 53).
2
Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
Select Software to Install
window.
5. Using a Network-Connected Machine
54
Advertisement
Table of Contents
