Table of Contents
Advertisement
IPv6 configuration
DHCPv6 address configuration
If you have a DHCPv6 server on your network, you can set one of the following
options for default dynamic host configuration.
It may be necessary to press OK to navigate to lower-level menus for some
models.
1
Select
(Menu) > Network > TCP/IP (IPv6) > DHCPv6 Config on
the control panel.
2
Press OK to select the required value you want.
•
Router: Use DHCPv6 only when requested by a router.
•
Always Use: Always use DHCPv6 regardless of router request.
•
Never Use: Never use DHCPv6 regardless of router request.
5
From the SyncThru™ Web Service
Network model only (see "Software" on page 8).
Activating IPv6
1
Access a web browser, such as Internet Explorer, from Windows. Enter
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click Go.
2
If it's your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and password.
We recommend you to change the default password for security
reasons.
•
ID: admin
•
Password: sec00000
3
When the SyncThru™ Web Service window opens, move the mouse
cursor over the Settings of the top menu bar and then click Network
Settings.
Click TCP/IPv6 on the left pane of the website.
4
Check the IPv6 Protocol check box to activate IPv6.
5
6
Click the Apply button.
5. Using a Network-Connected Machine
51
Advertisement
Table of Contents
