Setting Room Temperature Heating - Navien NR-35D User Manual

Setting Room temperature heating

1. Press button.
The lamp above button will switch
on and heating temperature display
will flicker.
※Refer to Page 18 for setup of the 24 Hour program.
14
2. Select the heating temperature
by turning the dial.
Press OK button to save or leave it as it is after
selecting the temperature for auto-save.
Temperature control range is 10~40°C at intervals
of 0.5°C. The operation display will switch on and
heating will start if the current room temperature
is lower than the set temperature while the time
zone is set to " ON " in the 24 Hour program.
Please set the temperature lower than the current
room temperature or set the time zone " OFF " in
the 24 Hour program if you wish to stop heating.