Using The Computer - LG L1510SF-SV User Manual

Connecting the Display

Using the Computer

1.
Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection.
2.
Connect the power cord into a proper power outlet that is easily accessible and close to
the display.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to
maintain standard compliance for the product.
3.
Press
power on. When product power is turned on, the 'Self
Image Setting Function' is executed automatically.
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When
the user connects the monitor for the first time, this function automatically adjusts the display to
optimal settings for individual input signals.
'AUTO/SELECT' Function? When you encounter problems such as blurry screen, blurred letters,
screen flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO/SELECT function button to improve resolution.
Signal Cable
Power Cord
Analog signal
D-sub
* Varies according to model.
Wall-outlet type
PC
MAC
button on the front switch panel to turn the
*
2
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on thesupplied cable to a 15 pin 2 row connector.
4
1