One for All URC-4220 User Manual page 8

All manuals and user guides at all-guides.com
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press
2. Press and hold
then release
SET
3. Enter - -
9 9 1
4. Aim the remote control at the TV and slowly alternate
between pressing
off (after pressing
Power key, you can substitute another function, such as
digits ~ ,
0 9 CH +
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release
twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
CHECKING THE CODES
If you have set up the remote control using the
cedure (as above), you may need to find out which four-digit code is operat-
ing your equipment. For example,to find out which code is operating your
TV:
1. On the remote control, press
2. Press and hold
then release
SET
3. Enter - -
9 9 0
4. To view the code for the first digit, press
seconds, count the
write down the number in the leftmost box in the TV
code boxes on page 8.
NOTE: If a code digit is "0", the LED will not blink.
once.
TV
until the (red light) blinks twice,
SET LED
.
. The will blink twice.
LED
and . Stop when the TV turns
POWER TV
POWER ). If the device does not have a
, or ).
PLAY
. The
SET LED
Searching For Your Code
once.
TV
until the (red light) blinks twice,
SET LED
.
. The will blink twice.
LED
once.Wait 3
1
blinks (e.g., three blinks = 3) and
LED
9
will blink
pro-