One for All URC-4220 User Manual page 7

All manuals and user guides at all-guides.com
PROGRAMMING DEVICE CONTROL
The One For All 4 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player,a Motorola cable
box, and an RCA VCR.To control devices other than the default brands, per-
form the following steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e.,
, ,or
DVD CBL/SAT
NOTE: To program control of a VCR, PVR (or DVR), TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once. After program-
ming a VCR Combo device, you will be able to control channel selec-
tion, volume, and VCR functions.
NOTE: To program control of a DVD Player, DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once. After program-
ming a DVD Combo device, you will be able to control channel selec-
tion, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold
then release
SET
4. Use the
Manufacturer's Codes
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed cor-
rectly, the
LED
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press
once. The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to con-
trol. For future reference,write down each working device
code in the following boxes:
Code:
VCR/PVR
Code:
DVD
Code:
CBL/SAT
Code:
TV
).
TV
until the (red light) blinks twice,
SET LED
.
(starting on page 36) to
will blink twice.
on next page.
Device Type:______________
Device Type:______________
Device Type:______________
Device Type:______________
8
,
VCR/PVR
POWER