One for All URC-4220 User Manual page 13

All manuals and user guides at all-guides.com
3. Volume will again be independently controlled according
to its default states for all programmed devices.
CLEARING CUSTOM PROGRAMMING
The One For All 4 Device Universal Remote Control contains an
Feature Reset program.
If desired, you can use it to clear custom programming, except your setup
codes and reassigned device keys, and reset them to original factory set-
tings. Also see Restoring Factory Default Settings
IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels, and Volume Lock.
1. Press and hold
then release
SET
2. Enter - - . The
9 8 0
will return to normal operation.
RESTORING FACTORY DEFAULT SETTINGS
The One For All 4 Device Universal Remote Control also contains a
program that you can use to reset all custom settings and setup codes
Reset
to original factory settings.Also see
IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels, Volume Lock, Reassigned Devices, and all
device settings.
1. Press and hold
then release
SET
2. Enter - - . The
9 8 1
will return to normal operation.
Operational
as below.
until the (red light) blinks twice,
SET LED
.
will blink twice. The remote control
LED
Clearing Custom Programming
until the (red light) blinks twice,
SET LED
.
will blink twice. The remote control
LED
14
Factory
as above.