Table of Contents
Advertisement
Installation Instructions
Installation and Connection
Please fully observe the following safety precautions.
Important
■
■
■
■
Safety Instructions
■ When performing the installation, follow these
instructions completely. Improper installation may
cause an electric leakage or fire.
■ Install 220-240 V / 40 A dedicated single-phase
(or three-phase at 380-415V 2N) circuit with
the earth leakage circuit breaker for the power
supply. The electrical wiring may abnormally
overheat if the dedicated circuit is not properly
connected.
■ Electrical work must be performed by a legally
qualified electrician. Improper wire connections
may cause electric leakages or fires.
38
Unpack the appliance, remove all packing material, and examine
for any damage. If the appliance is damaged do not install and
notify your dealer immediately.
Install the appliance in accordance with the Installation
Instructions. Otherwise, the performance of the appliance may be
affected.
After installation, perform a test run and explain to the customer
how to operate the appliance.
Correct installation is the responsibility of the installer. Any
malfunction or accident resulting from the failure to follow
Installation Instructions is not covered by the warranty.
Advertisement
Table of Contents
