Paging Audio Input/Output - Russound Sphere E Series Installation Manual

PAGING AUDIO INPUT / OUTPUT
PAGING AUDIO IN/OUT
The ZXP-E5 has a paging audio input and loop output that accepts line
level audio via RCA cables. The paging input interfaces with the ACA-E5's
page output. When a page event is triggered through the ACA-E5 controller,
it interrupts audio outputs for all enabled zones. System wide paging can be
disabled permanently in each zone by software programming or temporarily
with DND.
When using doorbells, alarms and paging, the Paging Audio output must
be looped to the next controller in a multi-unit system, and NOT looped to third
party paging systems.
If doorbells and alarms are NOT used, the Paging Audio output can be
looped to third party paging systems.
18
Russound ZXP-E5 Installation Manual