Speaker Outputs - Russound Sphere E Series Installation Manual

SPEAKER OUTPUTS

SPEAKER OUTPUT CONNECTIONS
CAUTION: Do not connect L- and R- together. Use four-conductor cable
and wire each ground individually. Do not use a common ground. Shorting
between terminals will cause damage to the digital amplifier.
The ZXP-E5 supports speaker outputs for six zones. These stereo speaker
level outputs have high-current two-channel digital amplifiers for 40 watts per
channel. Each speaker connection requires a 4 to 8-ohm load.
The speakers are connected to the ZXP-E5 using modular snap speaker
connectors. Each of these color coded connectors is designated for the
speaker set of a particular amplified zone. To avoid confusion, connect one
zone speaker set at a time starting with the connector marked 1, taking care to
keep zone and speaker wire identities straight.
12
Russound ZXP-E5 Installation Manual