Audio Inputs - Russound Sphere E Series Installation Manual

AUDIO SOURCE CONNECTIONS

AUDIO INPUTS

Sources are directly connected to the main ACA-E5 controller and looped
out to the ZXP-E5 source inputs. These sources can be programmed in
SCS-E5 software during zone setup to be global sources, or a source which
is assigned to one or more but not all zones.
Using RCA audio cables, connect the Left and Right Audio loop outputs
for each source on the ACA-E5 to the corresponding inputs on the ZXP-E5
zone expander.
AUDIO LOOP OUTPUTS
The buffered loop-through outputs are used to loop to additional ZXP-E5
expanders or other AV switching systems such as a home theater receiver.
14
Russound ZXP-E5 Installation Manual