Operate And Display Of Remote Control - Panasonic CU-RE9NKX Service Manual

11.3 Operate and Display of Remote Control

11.3.1 Original setting
11.3.2 Mode selecting button
UTO, HEAT, COOL, DRY can be selected by pressing "MODE" button. Initial display of LCD is as follow
A
*Keeping the button depressed continuously, the operation mode will change in the following order in turn
AUTO—HEAT—COOL—DRY--AUTO
11.3.3 Temperature adjusting button
Temperature adjusting range is between 16 ℃~30 ℃
11.3.4 Fan speed button
There are 5 speed levels can be selected. The display on the remote controller changes as follows by pressing the AIR SWING
button.
11.3.5 AIR SWING button
To adjust vertical airflow directions by pressing AIR SWING button (5 options)
11.3.6 QUIET AND POWERFULL button
Start Quiet operation: Press QUIET button until "QUIET" displaying on remote control display to identify Quiet mode
operating.
Start POWERFUL operation: Press POWERFUL button until "POWERUL" displays on remote control display to
identify Powerful mode operating.
Switch Quiet/Powerful operation to normal operation: Press QUIET or POWERFUL button until "QUIET" or
"POWERFUL" on remote control display disappear, which identifies the unit returns to normal operation.
Note: QUIET and POWERFUL operation can not be active simultaneously.
31