Operate And Display Of Remote Control - Panasonic CS-LE9NKD Service Manual

11.3 Operate and Display of Remote Control

11.3.1 Original setting
11.3.2 Mode selecting button
UTO, HEAT, COOL, DRY can be selected by pressing "MODE" button. Initial display of LCD is as follow
A
*Keeping the button depressed continuously, the operation mode will change in the following order in turn
AUTO—HEAT—COOL—DRY–AUTO
11.3.3 Temperature adjusting button
Temperature adjusting range is between 16 ℃~30 ℃
11.3.4 Fan speed button
There are 6 speed levels can be selected. The display on the remote controller changes as follows by pressing the AIR SWING
button.
QUIET OPERATION: To provide quiet environment comparing to normal operation by reducing the air flow noise.
The Quiet operation can be entered by pressing FAN SPEED until the display switched to show QUIET on the
remote control screen.
11.3.5 AIR SWING button
To adjust vertical airflow directions by pressing AIR SWING button (5 options)
11.3.6 POWERFUL button
Enable the desired set temperature to be reached quickly.
Start POWERFUL operation: Press POWERFUL button on remote control, "POWERFUL" displays on remote control
screen and send signal to indoor unit to turn on Powerful operation mode.
To stop POWERFUL operation, press POWERFUL button again. Display of POWERFUL on remote control will
disappear.
Note: POWERFUL, AUTO COMFORT and ECONAVI operation can not be active simultaneously.
23