Table of Contents
Advertisement
6.4.
Setting Threshold Values
This explanation uses
(Threshold value using numerical input) or
weight) to
Selecting a input method
Step 1 Press and hold the SAMPLE key to enter the function table.
Step 2 Press the SAMPLE key several times to display
Step 3 Press the PRINT key to enter
Step 4 Press the SAMPLE key several times to input threshold value. Refer to the following
"Threshold value using numerical input" or "Threshold value using sample weight".
Step 5 If the PRINT key is pressed when threshold value is displayed, the current parameters
are displayed (all digits blinks).
Numerical input of threshold values
Step 6 If changing the parameters, press the RE-ZERO key to store the following keys.
SAMPLE key
RE-ZERO key
MODE key
PRINT key
CAL key
If the current parameters will be maintained, press the PRINT or CAL key to proceed
to step 7.
Step 7 Repeat step 4, 5 and 6 for other threshold values.
Storing threshold values using sample weight
Step 8 Press the RE-ZERO key to display
Put the sample on the weighing pan and press the PRINT key to store weighing value as
the threshold value.
RE-ZERO key
PRINT key
Step 9 Repeat step 4, 5 and 6 for other threshold values.
(5-stage comparison) and specifies
(input method) in the function table and inputs the threshold value.
Moves blinking digit.
Changes value of blinking digit.
Changes polarity.
Stores and proceeds to step 7.
Cancels and proceeds to step 7.
Resets display of the balance to zero.
Stores weighing value and proceeds to step 9.
(Threshold value using sample
(If
(Comparator threshold value).
0.00 g .
15
or
is displayed.
(Comparator threshold value).
(If
(If
)
)
)
Advertisement
Table of Contents
