Table of Contents
Advertisement
HR407M-P_BGBRLLK_ENG
8/9/04
AV2 Connection – You can connect a decoder or the other device to the
AV2(DECODER) jack on the rear panel.
[Decoder]: Select this when you connect a PAY-TV or Canal Plus
decoder to the AV2(DECODER) jack on the unit.
[Others]: Select this when you connect a VCR or similar recording
device to the AV2(DECODER) jack on the unit.
Power Save mode – Selects whether this unit is in power save mode
when the power is turned off. This option is not available when a timer
recording is set.
[ON]*
1
: The front panel display is off and only signals arriving at the
antenna input are passed through when the unit is turned off.
[OFF]: Turns off the [Power Save Mode].
*1 If you turns off the unit while receiving encoded signals, the power save
mode does not work
Antenna Feed 5V – If you are using an indoor antenna, use one with a sig-
nal amplifier rated at DC 5V, 100mA and set this option to [ON].
[ON]: Power is supplied to the connected antenna.
[OFF]: The unit does not supply power to the connected antenna.
Initialization – You can reset the unit to its original factory settings
and format the HDD.
[Factory Set]: You can reset the unit to all its factory settings. Some
options cannot be reset (Rating, Password, and Area Code). The auto
setup menu appears on the screen after the factory settings.
[HDD format]: Everything recorded on the HDD will be erased.
28
4:49 AM
Page 28
Adjust the language settings
DTV Audio – Digital channels sometimes provide multiple audio tracks,
often in a different language. You can set a default audio language with this
setting.
If provided by the broadcaster, you can also select a different audio lan-
guage while viewing TV by pressing AUDIO repeatedly.
DTV Subtitle – Digital channels sometimes provide subtitle, often in a differ-
ent language. You can set a default subtitle language with this setting, if
DTV subtitle is provided by the broadcaster. Press SUBTITLE repeatedly to
select a subtitle language while viewing digital TV viewing.
Adjust the audio settings
Dolby Digital – Selects the type of digital audio signal when using the
DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack.
[Bitstream] – Select this when you connect this unit's DIGITAL AUDIO
OUT (OPTICAL or COAXIAL) jack to an audio component with a built-in
Dolby Digital, DTS or MPEG decoder.
[PCM] (for Dolby Digital / MPEG) – Select this when you connect this
unit's DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack to an audio
component without a built-in Dolby Digital or MPEG decoder.
Advertisement
Table of Contents
