Table of Contents
Advertisement
HR407M-P_BGBRLLK_ENG
8/9/04
Adjust the Channel setup settings
1 Displays the HOME menu:
2 Selects the [Channel Setup] option:
3 Selects the setup option:
4 Selects a desired option on the first level:
5 Move to second level:
6 Selects a desired option on the second level: v v V V
7 Move to third level:
8 Adjust or confirm the setting:
9 Go back to the previous level:
First level
Second level
4:49 AM
Page 27
ON REMOTE
HOME
b b B B , OK (
)
B B
v v V V
B B
B B
v v V V , OK (
)
b b
Third level
Adjust the Channel setup settings - more you
can do
Adjust the general settings
Auto Programming – This option automatically scans and sets the avail-
able channels. Password is needed to access this option, if [Lock System]
option is set to [On]. (page 29)
[All, Digital or Analog]: Select a broadcasting type which you want to
scan automatically.
[Start]: Start the channel scanning.
Program Edit– This option allows you to add channels and edit preset
channels. Password is needed to access this option, if [Lock System]
option is set to [On]. (page 29)
[Add Channel]: Select the broadcasting type between [Digital] and
[Analog] and then press v v V V to select the channel and press OK (
add the selected channel.
[Edit]: Displays the screen which show preset channel list and channel
editing options. (page 25)
Clock Set– The clock must be set in order to use [Timer record].
[Auto]: Set the channel that broadcasts a clock signal and the clock will
be set automatically. If the clock that has automatically set is different
with your local clock, you can add more time using [Time Offset] option.
(For example, when summer time is started in local area.) Press B to
select [Time Offset] option. Press v V to select a value then press OK
(
) (0, 30, 60, 90, 120). Select "0" if the clock that has automatically
set is identified with your local clock.
[Manual]: If there is no channel that broadcasts a clock signal in your
area, you can set the time and date manually.
) to
27
Advertisement
Table of Contents
