Table of Contents
Advertisement
HR407M-P_BGBRLLK_ENG
8/9/04
Controlling a TV with the Supplied Remote Control
You can control the volume, input source, and power state of your TV with
the supplied Remote Control.
You can control your TV using the buttons below.
TV POWER
By pressing
You can
TV POWER
Turn the TV on or off.
AV
Switch the TV's input source between the
TV and other input sources.
PR +/–
Scan up or down through memorized
channels.
VOL +/–
Adjust the volume of the TV.
Note:
Depending on the unit being connected, you may not be able to control
your TV using some of the buttons.
4:49 AM
Page 11
TV Control
Buttons
To programme the remote to control the TV using the
manufacturer code
If your TV is listed in the table on the next page, set the appropriate manu-
facturer code.
1
While holding down TV POWER button, press the number buttons to
select the manufacturer code for your TV (see page 59-61).
• If more than one code number is listed, try entering them one at a
time until you find the one that works with your TV.
2
Release TV POWER button.
Notes:
•
Depending on your TV, some or all buttons may not function on the TV,
even after entering the correct manufacturer code.
•
If you enter a new code number, the code number previously entered
will be erased.
•
When you replace the batteries of the remote, the code number you
have set may be reset to the default setting. Set the appropriate code
number again.
11
Advertisement
Table of Contents
