Operating Your Video Recorder - LG LV880 User Manual

GC985/967NP1 NA4ULL-ENG 3/17/04
Operating your Video Recorder
The main functions of your Video Recorder can be operated using either the Remote Control or front control panel on the Video
Recorder. Before starting, you should ensure that your television and your Video Recorder have been plugged in and switched
on and that the video channel on your television is selected.
Playing a video tape
Press PLAY B The television screen
will display PLAY and SP or LP
depending on whether the
recorded tape is Standard Play or
Long Play.
Auto tracking
Your Video Recorder will automatically
adjust the tracking to give you the
best picture quality. A.TRACKING
will be displayed on screen while this
function is in operation.
If the quality of the recording is poor,
repeatedly press TRK + or - on the
remote control to manually adjust the
tracking until any distortions have
been removed. Press numbered 0
on the remote control to switch
automatic tracking back on again.
Stopping play
Simply press STOP 9 to halt video
play. The Video Recorder will revert
to television mode.
Picture Search
While a video cassette is playing you
can search the tape forward and
backward to look for a specific
position on the tape.
9:00 AM Page 7
Press REW 5 or FF 6 to make
the tape play rapidly forwards or
backwards. The picture will be
shown at seven times normal play
speed.
Fast Forward/Rewind
To fast forward or rewind at
maximum speed, the tape must not
be in play mode. Press STOP 9 then
press either REW 5 for rewind or FF
6 for fast forward. Whilst you are
rewinding or fast forwarding you can
view the section you are passing.
Press and hold (for a few seconds)
either REW 5 or FF 6. Releasing
the REW 5 button or FF 6 button
will return the Video Recorder to
normal rewind or fast forward
operation.
Slow Motion Playback :
Using the 1 or 2 buttons it is
possible to adjust playback speed
during playing back or still picture.
Below is a list of what speeds are
accessible and how to reach them.
1 once = slow play
1 twice = still
1 three time = play backwards
1 four time = Reverse play 3x speed
1 five time = Reverse play 7x speed
2 once = 2x forward play
2 twice = 7x forward play
To switch off the slow motion and
shuttle, press the desired function.
During slow motion and shuttle, the
noise bars may appear on the
picture according to the status of
tape. If distortions can be seen in the
picture, reduce them with TRK + or -.
Pausing a tape
Pressing P/STILL ; will pause play,
giving you a still picture on the
screen. This picture may display
some interference in the form of
black and white horizontal lines.
This is perfectly normal and does not
mean that the video tape or Video
Recorder are damaged.
The tape can be paused for up to
five minutes. The Video Recorder will
then automatically stop playing in
order to avoid damaging the tape or
your Video Recorder.
Frame Advance
1 Pressing P/STILL ; repeatedly will
advance the picture frame by
frame.
2 You can use the or
buttons to reduce any vertical
movement seen on the still picture.
3 Press PLAY B to continue play
from pause.
Removing the Video
tape
Press EJECT / to remove the video
cassette from your Video Recorder. If
the end of the tape is reached, your
Video Recorder will automatically
stop, rewind, eject the tape and
place itself into Standby mode.