Data And Control Flow - Samsung CLP-775ND Series Service Manual

2. Product spec and feature

2.2.6.3. Data and Control Flow

o s t
Web-b as ed
- Do cument Manag ement
S ys tem
- Netwo rk Ad minis tratio n
- S tatus Mo nito r
- Remo te Co ntro l P anel
S tan d-alo n e
- P rinter S etting Utility
- Netwo rk Ad minis tratio n
- S tatus Mo nito r
•
Host Side is made up of :
1) Driver that is Windows application software translates printed data to one of printer language and create the
spooler file.
2) Web-based Application that offer a various printer additional functions, management of printing job, printer
administration, Status monitor to monitoring the printer status by real time in Web, independent environment on OS.
3) Stand-alone Application that is a similar Window software, as number 2 above.
4) Port Monitor that manages the network communication between spooler and Network Interface Card, or various
additional application and Network Interface Card.(this is, at first, make communication logical port, manages the
data, transfers them from spooler to network port, and the manages the printing as well.)
•
Firmware Side is made up of :
1) Network Interface Application relays the communication between Host and kernel using various network protocol.
2) Kernel manages the flow control of the emulation procedure, the receiving of data from Host or Network application
and rending and printing in the with engine.
3) Emulation is that interprets the various output data from selected emulation.
4) Engine prints rendered bit-map data to paper with required size and type by Kernel. And then, for Job Spooling
function for Multi-User, Multi-Printing that is occurred in Network printing and various additional printing
functions, this Kernel uses max. 10 Queuing systems in memory.
2-31
irmwa re
S
KERNEL
Netwo rk
In terface
Ap p licatio n
Ap p licatio n
(Em u latio n )
- L
- S
Copyright© 1995-2016 SAMSUNG. All rights reserved.
En in e