Paper Ejection Problems - Epson M100 User Manual

Note: Do not touch the flat, white cable or ink tube inside the product.
4. Close the cover.
5. Press the
6. Carefully follow all paper loading instructions when you load new paper.
Parent topic:

Paper Ejection Problems

If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing using the product
control panel, then press the
product. Select the correct size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting in your printer software when you reprint.
Parent topic:
Related tasks
Cancelling Printing Using a Product Button
cancel button to resume printing.
Solving Paper Problems
cancel button to eject the paper. Remove any paper remaining in the
Solving Paper Problems
80