Husky HPRO72HUTCHBLK Use And Care Manual page 7

2
Attach the Hutch to the Workbench
Two people are required for assembly.
CAUTION:
□
Remove the 2 side handles and 8 bolts (not included with Hutch) from the existing 72 in. 20-Dr. Workbench and
temporarily attach to the Hutch to help with lifting for assembly. The handles can be re-installed on the 72 in.
20-Dr. Workbench once the Hutch assembly is complete.
□
Carefully lift the Hutch (A) and gently place on the Workbench.
□
Open the Hutch door and check for proper alignment of the connection holes through the steel work surface.
Ensure the Hutch is ush with the front and sides of the Workbench.
□
Use 8 pcs M6*48mm ange bolts (BB) to secure the Hutch along the sides and back to the Workbench.
Tighten with a 8mm socket or wrench.
□
Be careful not to over tighten.
BB
7 Please c ontact 1-888-HD-HUSKY
BB
HUSKYTOOLS.COM
for further assistance.