Assembly - Husky HPRO72HUTCHBLK Use And Care Manual

Assembly

The 72 in. Hutch is designed to speci cally t only on the Husky Professional Duty 72 in. 20-Drawer Workbench ,
which includes the following products:
72 in. 20-Dr. Professional Duty Workbench
27.5 in. Professional Duty Side Locker
63.5 in. Professional Duty Top Locker
72 in. Professional Duty Top Locker
1
Drill attachment holes
Drill template
□
Align and x the
72in Workbench, ush with the left edge. Figure 1:1.
□
Use a marker to mark hole locations A, B, C. Figure 1:2.
□
Align the Template (AA) on the back right corner, ush with the right edge and mark hole locations B, C, D. Figure 1:3.
□
Align the Template (AA) on the front right corner, ush with the right edge and mark hole locations A. Figure 1:4.
□ Flip the Template (AA) over and align with the front left corner, and mark only hole location D. Figure 1:5.
□
There should be a total of 8 marked hole locations on the steel work top. Ensure correct, per Figure 1:6.
□
Use a hammer and punch to create a small divot in the steel top at each of the marked locations for the
drill bit to align.
Figure 1:1
Figure 1:4
CAUTION:
□
Using a power drill and the Stop drill bit (JJ), carefully drill the 8 connection holes. Ensure holes are drilled clean
and perpendicular to the surface to properly expose the press nuts beneath.
Model # HPRO72MWC20BLK
Model # HPRO27SLOCKERBLK
Model # HPRO63TLOCKERBLK
Model # HPRO72TLOCKERBLK
(AA) on the back left corner of the stainless steel top of the Husky Professional
B
A
A D
Use caution when drilling the attachment holes through the steel top.
SKU # 1000000000
SKU # 1000000000
SKU # 1000000000
SKU # 1000000000
C
Figure 1:2
Figure 1:5
6
B
Figure 1:3
4
3
1 2
8
Figure 1:6
C
D
5
6
7
Power Drill