Table of Contents
Advertisement
ASSEMBLY
Make Assembly Easier
Everything in this manual is designed to ensure
that the weight system can be assembled suc-
cessfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the
following information and instructions:
• To hire an authorized service technician to
assemble the weight system in your home, call
1-800-445-2480.
• Assembly requires two persons.
• Because of its weight and size, the weight sys-
tem should be assembled in the location where it
will be used. Make sure that there is enough
clearance to walk around the weight system as
you assemble it.
• Place all parts of the weight system in a cleared
area and remove the packing materials. Do not
1.
Before beginning assembly, make sure that
you understand the information in the box
above.
Attach the Rear Stabilizer (5) to the Base (1) with
two M8 x 76mm Carriage Bolts (59) and two M8
Locknuts (74).
See the inset drawing. Press the two Base Caps
(38) onto the Base (1).
All manuals and user guides at all-guides.com
6
dispose of the packing materials until assembly is
completed.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• As you assemble the weight system, make sure
all parts are oriented as shown in the drawings.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• Assembly requires the following tools:
the included hex key(s)
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
5
74
1
38
59
74
1
38
Advertisement
Table of Contents
