Universal Connector Cover - Motorola XTS-5000 Operation

Universal Connector Cover

Universal Connector Cover
On / Off / Volume
Control C t l
1
3
2 2
2
3
The universal connector cover protects the side
connector near the antenna.
To remove the cover:
1. Turn the radio off. 1 Turn the radio off
2. Carefully insert a flat-bladed screwdriver between the
bottom of the cover and the connector.
3. Holding the top of the cover with your thumb, push 3 Holding the top of the cover with your thumb push
the screwdriver gently downward and lever the cover
away from the radio.
To install the cover:
1. Turn the radio off.
2. Insert the hooked end of the cover into the slot above
the connector.
3. Rub the ball of your thumb from the top to the bottom
of the cover, applying pressure towards the radio. This
will flex the cover and snap it into place.
p
21 21