Bluetooth Mode - 5five F26 User Manual

A U X M O D E
The AUX jack is for connecting an external audio device to enhance sound.
To do this, connect an external source to the AUX line-in input on the front
panel. After connecting the equipment by successive pressing the button
on the front panel, select the AUX mode. If connected correctly, the audio
signal from an external source will be transmitted through the acoustics of
the head unit. This makes it possible to adjust the volume and sound
quality. For example, you can connect an MP3 player to listen to audio
through the car speakers.
R E S E T F U N C T I O N
The RESET button can be activated using a ballpoint pen or a thin metal
tool. This option may be required in the following cases:
First installation, after connecting all wires.
None of the control buttons work.
The message ERROR on the display.
B T M O D E
Turn on the receiver and use your BT-enabled mobile device to search for
CAR-BT. If necessary, enter "0000" after detection.
After pairing, the device will display
The device supports A2DP exchange protocol.
To start playing / pausing music, press the button 1/
Press the button
To end the conversation, press the button
To switch between BT and mobile device during a call, press the button 1/
To call the last person in the call list, press and hold the button
After disconnecting, the device will display
14
to answer the call. The display will show