Table of Contents
Advertisement
Track selection
Briefly press the
or
button to switch to the previous file or the next.
The display will show the file number. Press the
or
button while
holding to scroll backward / forward. Playback starts when the button is
released.
Pause playback
Press the 1/
button to pause playback. Press the 1/
button again to
resume playback.
Preview all files
Press the 2 / INT button on the front panel. The INT ON indicator will appear
on the display, after which overview playback of each file will begin for 10
seconds. After the scan of the last file has finished, playback of the file from
which the scan started will begin. To interrupt the scan operation, press the
2 / INT button again.
Repeat file playback
To enable the file repeat mode, press the 3 / RPT button. When the 3 / RPT
button is pressed again, all files will be played back.
Play all files in random order
Press the 4 / RDM button to play all files in random order. Press the button
again to cancel the function.
Note:
The INT, RPT, RDM modes are switched on the first time the corresponding
buttons are pressed, and a brief indication appears on the screen to turn
on the mode (INT ON, RPT ON, RDM ON). Pressing the corresponding buttons
again disables the modes with a brief indication on the screen that the
mode is turned off (INT OFF, RPT OFF, RDM OFF). At the same time, INT, RPT,
RDM cannot work. Only the last selected mode remains active with the
corresponding indication on the screen.
Skip 10 tracks back
To go back 10 tracks, press the 5 / -10 button with hold
Skip 10 tracks forward
To go forward 10 tracks, press the 6 / + 10 button with hold
SD card management
On the front panel of the receiver there is a slot for connecting SD-memory
cards (card reader). When you connect an SD memory card to a
compatible interface, the system will search for audio files on the memory
card. When files are detected, playback will start. Management of the SD
interface is similar to the management of the USB interface, which was
described above. SD mode selection is initiated using the button
Note:
1. The device only supports standard USB flash drives that are approved by
Microsoft.
2. USB-MP3-players are not standardized, which means that different
brands and different models may have their own standards. The system
may not support all MP3 players.
13
Hide quick links:
Advertisement
Table of Contents
