Radio Mode; Media Player Mode - 5five F26 User Manual

Car aux /usb/microsd receiver with bt function
Table of Contents

Advertisement

D A T E A N D T I M E S E T T I N G S
To display the clock on the screen press CLK button. To set the current time,
press and hold CLK. The hour numbers will blink. The digital value is set by
rotating the volume control. Press the parameter select button to go to the
minute setting; numbers meaning minutes will blink. Rotate the VOLUME
knob to adjust the minutes. Click on CLK button to confirm the clock setting.
R A D I O M O D E
F R E Q U E N C Y R A N G E S E L E C T I O N
In radio mode, press the BND button repeatedly to select required range.
Switching occurs in the following order: FM1> FM2> FM3
Auto Radio Tuning
Press and hold the AMS button for several seconds. The automatic scanning
of the radio range and storing of the found stations in the device memory
will begin. After scanning, listening to the first radio station found will begin.
Introductory listening
Briefly press the AMS button. Sequential playback starts for 6 seconds. each
of the 18 preset radio stations.
Manual tuning of the radio
To search and tune in radio stations manually, press the
scan the band backward or forward, respectively. The found radio station
can be entered into the memory cell by pressing and holding one of the
digital buttons 1 - 6. This default setting is made in AUTO mode. Press and
hold the button
allows you to change the frequency in 0.1 MHz steps.
Switch to saved radio stations
Briefly press one of the number buttons 1 - 6 to switch to the radio station
stored under this number in the current frequency range.
M E D I A P L A Y E R
There is a USB interface on the front side of the device. To the USB connector
a USB flash drive can be connected. When connecting a USB flash drive to
the USB interface, the receiver switches to USB mode by default regardless
of current mode and starts searching for supported audio files on the flash
drive. When files are found, playback will start. When USB flash drive
connected to activate the USB mode, press the button
until "USB" appears on the display of the unit.
12
until MANUAL appears. Manual tuning mode
button to
repeatedly,

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F26gF26rF26w

Table of Contents