Radio Mode; Bluetooth Source; Audio Source Selection - Fiat 500 Hybrid 2020 Owner's Handbook Manual

Switching the system
on/off
The system is switched on/off by
pressing the (ON/OFF) button/knob.
Turn the button/knob clockwise
to increase the radio volume or
anticlockwise to decrease it.

Radio mode

After the desired radio station is
selected, the following information is
shown on the display:
At the top: the list of radio stations
stored (preset) is displayed; the station
currently playing is highlighted.
In the middle: display of the name
of the current radio station and the
buttons for selecting the previous or
next radio station.
At the bottom: display of the following
buttons:
"Browse": list of the radio stations
available;
"AM/FM", "AM/DAB", "FM/DAB":
selection of the desired frequency band
(button reconfigurable according to the
band selected: AM, FM or DAB);
"Tune": manual radio station tuning
(not available for DAB radio)
"Info": additional information on the
source being listened to;
"Audio": access to the "Audio
Settings" screen.
Audio menu
The following adjustments can be
carried out using the "Audio" menu:
"Equalizer" (where provided);
"Balance" (left/right audio balance
adjustment);
"Speed/Volume" (speed-dependent
automatic volume control);
"Loudness" (where provided);
"Auto-On Radio";
"Radio Off Delay".
To exit the "Audio" menu, press the
/ Done button.
Media mode

Audio source selection

Press the "Source" button to select
the desired audio source among those
available: USB or Bluetooth®.
Applications used on portable devices
may be not compatible with the
Uconnect™ system.
Track selection (Browse)
With Media mode active, briefly press
the / graphic buttons to play
the previous/next track or keep the
/ buttons pressed to fast
rewind/forward the track.
NOTE For languages not supported
by the system which feature special
characters (e.g. Greek), the keyboard
is not available. In these cases this
function will be limited.
NOTE The Uconnect™ system may
not support some USB keys: in this
case, it will not automatically switch
from "Radio" mode to "Media" mode. If
the device used does not play, verify its
compatibility by selecting Media mode:
a dedicated message will appear on
the Uconnect™ system display.
WARNING After using a USB
recharging socket, we recommend
disconnecting the device (smartphone),
always removing the cable from the
vehicle socket first, never from the
device.
NOTE The USB ports handle
data transmission from the Pen
Drive/Smartphone, etc. and slow
recharging of an external device, which
is not guaranteed as it depends on the
device type/brand.
Bluetooth® source
Pairing a Bluetooth® audio device
To pair a Bluetooth® audio device,
proceed as follows:
activate the Bluetooth® function on
the device;
press the MEDIA button on the front
panel;
if the "Media" source is active, press
the "Source" button;
173