Fix&Go Kit; Repair Procedure - Fiat 500 Hybrid 2020 Owner's Handbook Manual

41) Contact a Fiat Dealership as soon as
possible to have the correct tightening of
the wheel bolts checked.
Fix&Go KIT
(for versions/markets, where provided)
157) 158)
42)
DESCRIPTION
The Fix&Go quick tyre repair kit
fig. 126 is located in the boot, inside a
dedicated container and consists of:
one cartridge (1) containing sealant
and fitted with: transparent tube for
injecting the sealant (4) and sticker (3)
with the wording "Max. 80 km/h" to be
placed in a clearly visible position (e.g.
on the dashboard) after repairing the
tyre;
one compressor (2);
a pair of gloves located in the hose
compartment of the cartridge (4).

REPAIR PROCEDURE

Proceed as follows:
stop the car in a position that is not
dangerous for oncoming traffic where
you can carry out the procedure safely.
The ground must be flat and sufficiently
compact;
120
126
stop the engine, engage the hazard
warning lights and the parking brake;
put on the reflective safety jacket
before getting out of the car (if required
by the regulations in force). In any case,
follow the road safety laws in force in
the country where you are driving;
insert the sealant cartridge (1)
into the corresponding compressor
compartment (2)and press it down
hard fig. 126. Remove the speed limit
sticker (3) and apply it in a clearly visible
position fig. 127;
wear the gloves;
127
P2000158
remove the cap from the tyre valve
and connect and screw the transparent
tube of the sealing fluid (4) fig. 126
onto the valve. If a 250 ml cartridge is
present the housing of the transparent
tube is provided with removable ring to
facilitate extraction. Make sure that the
ON-OFF button (5) fig. 128 is in the off
position (button not pressed);
128
P2000162
P2000160