Steering Wheel; Rear; Downward Adjustment - Fiat 500 Hybrid 2020 Owner's Handbook Manual

14
13)

REAR

(for versions/markets, where provided)
Adjustment
Upward adjustment (usage
condition): raise the head restraint
until it clicks into place.

Downward adjustment:

simultaneously press the buttons A
fig. 15 and B at the sides of the two
supports, and lower the head restraint.
15
The particular shape of the head
restraint deliberately interferes with the
correct support of the rear passenger's
back on the backrest in order to force
them to lift the head restraint for correct
use.
WARNING If the rear seats are used,
always set the head restraints in the
"completely raised" position.
F0S0033
Removal
To remove the rear head restraints
press buttons (A) fig. 15 and (B) at the
side of the two supports simultaneously
and lift them out upwards. The rear
head restraints must be lifted out with
the backrest released and tilted toward
the passenger compartment or with the
tailgate open.
WARNING
12) All adjustments must be carried out
only with the car stationary and engine off.
Head restraints must be adjusted so that
the head, rather than the neck, rests on
them. Only in this case they can protect
your head correctly.
13) To make the best use of the head
restraint's protective action, adjust the
backrest so that you are sitting upright and
keep your head as close as possible to the
F0S0034
head restraint.

STEERING WHEEL

14) 15)
The steering wheel can be adjusted
vertically.
To adjust bring the lever (A) fig. 16
downward in position (2), then adjust
the steering wheel to the most suitable
position and lock it in this position
bringing the lever (A) in position (1).
16
WARNING
14) All adjustments must be carried out
only with the car stationary and engine off.
15) It is absolutely forbidden to carry
out any after-market operation involving
steering system or steering column
modifications (e.g.: installation of
anti-theft device) that could badly affect
performance and safety, invalidate
the warranty and also result in non-
compliance of the car with type-approval
requirements.
F0S0567
15