Reversing Light/Rear Fog Light; Third Brake Lights - Fiat 500 Hybrid 2020 Owner's Handbook Manual

REVERSING LIGHT/REAR FOG
LIGHT
Where the respective flap is provided,
proceed as follows to replace the bulb:
From inside the bumper, operate the
tabs (A) fig. 106 and remove the press-
fit flap;
106
disconnect the electrical connector
(A) fig. 107;
rotate the bulb holder (B) fig. 107
anticlockwise and extract it;
release the bulb and replace it;
107
reinsert the bulb/bulb holder unit (B)
by turning it clockwise;
reconnect the electrical connector
(A);
refit the flap and check that it is
correctly locked.
If the flap is not present, access the
bulb holder through the lower part
of the rear bumper to replace the
reversing and rear fog light fig. 108.
F0S0581
108

THIRD BRAKE LIGHTS

To replace the bulb proceed as follows:
remove the two guard caps and
unscrew the two fastening screws (A)
fig. 109;
F0S0582
109
remove the assembly;
disconnect the electrical connector
(B) fig. 110;
press the retaining device (C) fig. 110
and open the bulb holder;
F0S0674
110
remove the press-fitted bulb to be
replaced and replace it;
close the bulb holder making sure
the retaining device is correctly locked;
screw in the two fastening screws
and reinstall the guard caps.
F0S0058
F0S0059
109