Candy AQUAMATIC AQUA 1000 T Instructions For Use Manual page 5

NO SPIN button
By pressing this button it is possible to eliminate the spin-drying on all programmes. This
operation is suitable for programmes at 90°C and at 60°C in case of special treated fabrics
(cottonova or permanent press) or for mixed delicate fabrics.
EXTRA RINSE button
This function will allow an extra rinse or more water added at the rinse stage – depending on
the programme selected. This is particularly important for avoiding skin irritation from
detergent residues for people with particularly sensitive skin.
The extra rinse button is also recommended when washing heavily soiled fabrics, requiring
the use of a lot of detergent, or when washing items made of towelling, whose fibres have a
greater tendency to retain detergent.
WASH TEMPERATURE selector
Can be turned in either direction
This washing machine is equipped with this device for
setting the wash temperature you want. We recommend
that the temperature shown on the label inside garments
should never be exceeded.
The most suitable temperature and cycle for each type of
fabric is shown in the programme guide.
To protect fabrics, if the variable temperature dial has
accidentally been set too high than stated in the
programme guide, the machine will lower the temperature automatically.
8
D
PROGRAMME Selector
Note: never turn the dial anti-clockwise (Turn it
clockwise and do not press the on/off button before
selecting the programme.)
The tables in the washing section describe the various programmes and give the number or
symbol to select for them.
E
IMPORTANT : IF YOU NEED TO CHANGE A PROGRAMME THAT
HAS ALREADY STARTED – SWITCH OFF THE MACHINE BY THE
I
ON / OFF BUTTON AND THEN MOVE THE PROGRAMME DIAL
TO THE CORRECT POSITION. IF YOU DO NOT PRESS "OFF"
BEFOREHAND, THE DIAL WILL AUTOMATICALLY MOVE TO ITS
INITIAL POSITION.
Pull-out wash programme guide
Apply the adhesive label supplied in the appropriate
language onto the pull-out wash programme guide.
OK
9
L
M