Lexmark E210 User Manual page 123

Linux Driver Installation
2 Install the
Ghostscript.
3 Install setup
A.18
D P
RIVER AND RINTER
All manuals and user guides at all-guides.com
Note: Ghostscript may already be installed in your
To update the ghostscript:
a Change to the directory where the ghostscript is in by
typing in:
>cd/mnt/cdrom/linux/gs5.XX (where /mnt/cdrom is
the CD-ROM directory you have mounted at step 1
and XX is the version of the ghostscript to be
installed, 10 or 50.)
b Delete the ghostscript currently installed in your
machine by typing in:
/mnt/cdrom/linux/gs5.XX>rpm -e --nodeps
ghostscript
c Install the ghostscript which is supplied in the
Lexmark E210 CD-ROM by typing in:
/mnt/cdrom/linux/gs5.XX/rpm -ivh ghostscript -
5.XX-xx.i386.rpm
d When # appears on the screen and the installation
completes, the ghostscript is successfully updated. To
make sure, type in:
/mnt/cdrom/linux/gs5.XX/rpm -q ghostscript
If the 'ghostscript-5.XX-xx' message appears, the
installation is successfully completed.
For details on installing the setup script, refer to the
/cdrom/linux/install/readme.txt file.
script.
Add the driver to the printer list by typing in:
/cdrom/linux/install>install.sh (or)
/cdrom/linux/install>./install.sh (if the path of the
current working directory is not determined.)
S
PECIFICATIONS
Linux machine. To support the Lexmark printer
GDI, you must update the ghostscript. If you are
not sure whether the ghostscript is already
installed in your machine, use the command:
>rpm -q ghostscript (you can see the version of
the ghostscript currently installed in your machine
by this command.)