Lexmark E210 User Manual page 115

Print Media Specifications
Guidelines for Using Labels
Guidelines for Using Transparencies
A.10
D P
RIVER AND RINTER
All manuals and user guides at all-guides.com
Warning!
• To avoid damaging the printer, use only labels
recommended for laser printers.
• To prevent serious jams, always use the face-up
output slot.
• Never print on the same sheet of labels more than
once or print on a partial sheet of labels.
When selecting labels, consider the quality of each
component:
• Adhesives: The adhesive material should be stable at
200 °C (392 °F), the printer fusing temperature.
• Arrangement: Only use labels with no exposed backing
between them. Labels can peel off sheets with spaces
between the labels, causing serious jams.
• Curl: Prior to printing, labels must lie flat with no more
than 13 mm (.5 in.) of curl in any direction.
• Condition: Do not use labels with wrinkles, bubbles, or
other indications of separation.
See "Printing on Labels" on page 4.16.
Transparencies used in the printer must be able to
withstand 200 °C (392 °F), the printer fusing temperature.
Warning! To avoid damaging the printer, use only
transparencies recommended for use in laser printers.
See "Printing on Transparencies" on page 4.18.
S
PECIFICATIONS