Lexmark E210 User Manual page 101

Solving Print Quality Problems
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Curl or wave
AaBbCc
AaBbCc
AaBbCc
Wrinkles or creases
Back of printouts dirty
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Black pages
7.16
T
ROUBLESHOOTING
AaBbCc
All manuals and user guides at all-guides.com
AaBbCc
Problem
• Check the type and quality. Both high temperature and
humidity will cause curl. See "Print Media Specifications" on
page A.3.
• Turn over the stack of print media in the input tray. Also try
rotating the print media 180° in the input tray.
• Push the output lever and try printing to the face up output
slot.
• Make sure the print media is loaded properly.
• Check the type and quality of print media. See "Print Media
Specifications" on page A.3.
• Push the output lever down and try printing to the face up
output slot.
• Turn over the stack of print media in the input tray. Also try
rotating the print media 180° in the feeder.
• The paper path may be dirty. See "Cleaning the Inside" on
page 6.6.
• Check to see if the toner is leaking from the print cartridge.
Clean inside the printer. See "Cleaning the Inside" on page
6.6.
• The print cartridge may not be installed properly. Remove
the cartridge and reinsert it.
• The print cartridge may be defective and need replacing.
Install a new print cartridge.
• The printer may require repairs. Contact a service
representative.
AaBbCc
Solution
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc