Network Settings; Initialize - Sony DSC-G3 Cyber-shot&reg Handbook

Network Settings

A wireless LAN function is equipped with this camera.
Connect the camera to a network via an access point.
The time zone and access point need to be configured before the operation.
1
t (Communication) t [Network] t
t [ Network Settings] t
desired item
Access Point
Nickname
Network Power Save
Time Zone

Initialize

Notes
• Network device connections and setting methods differ according to the device.
• Set [Network Power Save] to [Off] in the following cases:
– When you cannot connect to an access point
– When trouble occurs in the network connection
• The following are needed to connect the camera to a network:
– An internet service provider (ISP) contract
– ADSL modem or other network device
– Access point or wireless router
– Access point setting information (SSID)
• The nickname set does not always display correctly depending on the device being sent to.
z Area settings for time-zone
Time zones are divided into the following regions.
t
Creates and saves the access point connection settings.
Enters the camera nickname displayed by the device you
want to connect with.
Sets whether to reduce power consumption when
uploading images or browsing the Web.
Selects the region in which you live.
Resets the network settings.
• Bookmark and address book settings are not reset.
117 GB