Table of Contents
Advertisement
1-4. INTERNAL SWITCH SETTINGS
Before installing the camera, set the internal switches according to the
SSC-M370/M370CE
1-5. MOUNTING THE LENS
Suitable lenses
Lens mounting surface
Remove the 6 fixing screws.
{
9mm max.| 6
!
Plug fitting for an auto-iris lens
Pin 1: Power supply (+9 V DC, 50 mA)
Pin 2: Unused
Pin 4: Ground
coding.)
2 Put the cover on the plug.
Internal switches ———
—— To auto-iris lens
2 Set the switches according to the conditions in which the camera is to
be used.
Rib
(If the cable is thick and
the plug cover does not
seat properly, cut away
this rib.)
Switch
AGC
ON
OFF (gain: 0 dB)
CCD IRIS* | ON
OFF
SHUTTER | (only effective when
CCD IRIS is off)
0: 1/60 s
(SSC-M370)
11/50 s
(SSC-M370CE)
1:1/100s
(SSC-M370)
1:1/120s
(SSC-M370CE)
: 1/250 s
: 1/500 s
: 1/1000 s
: 1/2000 s
: 1/4000 s
: 1/10000 s
Fitting the lens
When using an auto-iris lens, fit it as follows. For a manual iris lens, omit
step 3.
o
1 Unscrew the lens mount cap.
NOOR
WM
Plug supplied
with camera
3 Replace the upper cover on the camera body.
* CCD IRIS function. When using a manual iris lens, this function
automatically adjusts the shutter speed to maintain a suitable exposure
level. Turn this switch off when using an auto-iris lens.
3 Plug in the lens cable.
2 Screw in the lens.
1-3
Advertisement
Table of Contents
