DLNA–Be Viewed
Operate the DLNA-enabled "BRAVIA" via the home network and set the camera so that images
stored in the camera can be viewed.
1
t
(Communication) t [Network] t
t
(Be Viewed) t
2 Touch [Connect].
If there are multiple access points, touch [Access pt. to
connect to] to select the access point.
3 Select the image to be shared on the network.
4 Select the sharing method.
Notes
• You can share only still images.
• You can select up to 100 images at a time.
• To view the images with a DLNA-enabled device, setup and some operations of a playback device are
required. For details, see the operating manual of the playback device.
• Be sure to use sufficiently charged batteries while connected to the network.
Canceling one image to be shared
1 Touch the image during sharing to remove the checkmark.
Canceling all images to be shared
1 Touch
t
Exiting image sharing
1 Press the WLAN (wireless network) button, or touch
t
t [OK].
(Remove) t
t [OK] during sharing.
t
(Exit)
124
GB