Download Print this page
Capresso Impressa S Avantgarde Quick Reference Manual

Capresso Impressa S Avantgarde Quick Reference Manual

Advertisement

Quick Links

All manuals and user guides at all-guides.com
Impressa S Avantgarde Quick Reference Guide
This Guide does not replace the Operating Instructions.
For details and cautions you must read all instructions.
Traces of Coffee Grounds in New Machine?
This is normal! Grinder was tested during assembly with beans.
Despite cleaning, traces of ground coffee may be found.
SELE T
SELECT
PRODU T
PRODUCT
ON/OFF Rinse
Four Coffee Buttons
RED TEXT
represents display text.
A) First Time Ever Preparation
1. Fill water in tank and beans in bean container.
2. DO NOT install the Clearyl Filter Cartridge now!
3. Push the main power switch in the back of the machine.
4. Push the ON/OFF button in the display. When the display
reads
FILL SYSTEM / PRESS STEAM
the frother and push the PERMANENT STEAM button.
SYSTEM FILLING
5.
PRESS
RINSE. Place a cup under the coffee spouts and
press the RINSE button.
PRODUCT.
6. Place a large cup underneath the coffee spouts and press
the 1-CUP coffee button.
starts grinding and brewing. Repeat once. Discard the first
two cups of coffee.
B) Daily Preparation
1. Fill fresh water in tank and check bean container.
2. Push ON/OFF button.
a cup under the coffee spouts and press the RINSE button.
MACHINE RINSING. SELECT
Important: You can only brew coffee when display shows
SELECT PRODUCT
C) Grinding and Brewing Coffee
Four pre-set coffee buttons:
1
COFFEE,
2
COFFEES. These buttons are pre-set for
strength (five settings), cup size (1 to 8 oz. per cup) and
temperature (HIGH, NORMAL) During brewing you can over-
ride the cup size by turning the ROTARY DIAL. Cup size for
2-cup buttons is shown PER CUP! In programming you can
change all three functions.
Important: You can always stop the flow of coffee by pushing
any of the coffee buttons.
Steam
Permanent
Portion
Steam
Selector Switch
place a cup under
then
HEATING
UP.
MACHINE RINSING. SELECT
1
COFFEE: The machine
HEATING UP. PRESS
PRODUCT.
1
ESPRESSO,
A LA Carte
Rotary Dial
with
Push-Button
RINSE. Place
2
ESPRESSI,

Advertisement

loading

Summary of Contents for Capresso Impressa S Avantgarde

  • Page 1 All manuals and user guides at all-guides.com Impressa S Avantgarde Quick Reference Guide This Guide does not replace the Operating Instructions. For details and cautions you must read all instructions. Traces of Coffee Grounds in New Machine? This is normal! Grinder was tested during assembly with beans.
  • Page 2 All manuals and user guides at all-guides.com A LA CARTE button. Push the button and change the strength by turning the ROTARY DIAL (XMILD, MILD, NORMAL, STRONG, XSTRONG). Now push the ROTARY DIAL. During grinding turn the Dial to set the cup size. D) Changing the Grinder Fineness Important: You can only adjust the fineness during the actual grinding process.
  • Page 3 All manuals and user guides at all-guides.com • Open Front Cover and push and hold the ROTARY DIAL FILTER • Slowly turn the Dial clockwise to scroll through the following functions after FILTER NO: HARDNESS, RINSE, POWDER QUANTITY (strength), WATER QUANTITY (cup size), TEMP, WATER...
  • Page 4 All manuals and user guides at all-guides.com • Push the RINSE button. INSERT FILTER / PRESS STEAM. • Remove water tank, remove old filter. Keep the extension rod. Rinse new filter under running water, attach to extension and install in water tank. Fill with fresh water and insert water tank into machine.
  • Page 5 18. Place a container under the coffee spout and press the RINSE button. MACHINE RINSING. SELECT PRODUCT M) Supplies can be ordered through: Customer Service, Mail Order Form or www.capresso.com • Clearyl Water Filter Cartridge: #64553 • Cleaning Tablets: #62205 • Decalcifying Tablets: #61848...
  • Page 6 3. Place a cup underneath the steam nozzle and push the STEAM button for three seconds. 4. Replace frothXpress system. CAPRESSO CUSTOMER SERVICE: 1-800-220-5701 M-F 9AM - 9PM; Sat. 9AM - 5PM EST FAX: 201-767-9684 contact@capresso.com...