First Use; Display Description - Hoover H-OVEN 500 User Instructions

2.3 First Use

PRELIMINARY CLEANING
Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash
all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the
empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering
smells of newness.
3. Use of the Oven
3.1 Display description (full touch double cavıty)
1. On/Off
2. Extra Functions
3. Arrow (-)
4. Select/Stop
5. Arrow (+)
6. Cavity
7. Cooking functions
CAVITY: When the separator is placed inside the oven, you can select the lower or upper cavity by
pressing the button.
When you select a cavity, you need to set the desired cooking function by pressing the F key and then
press SELECT to confirm the choice.
It is now possible to set the cooking temperature by pressing the " <" and ">" keys, confirming your
selection by pressing SELECT. Following this procedure the oven starts to cook.
If you want to use the oven as a single cavity one, you have to remove the separator.
Press F to select the desired cooking function and confirm by pressing SELECT. Set the temperature by
pressing the "<" and ">" keys and confirm the selection by pressing SELECT. Following this procedure the
oven starts to cook.
NOTE: when a cavity is selected, all the information relating to cooking functions, temperature and time
refer to the cavity that was selected previously.
ON/OFF: The oven is switched on and off with this button
EXTRA: If the oven is switched off, the display shows the clock. When the oven is inactive, all the
functions are available except the cooking duration and end of cooking.
If the clock is not set, the oven does not work: the display flashes, showing "12:00" and the only
functioning key is Extra. From the Extra key, the following functions can be set:
3 4
1 2
GB 09
5 6 7