Table of Contents
Advertisement
Handset battery charging
The battery must be fully charged before
using the cordless handset for the first time.
The battery charge light turns on when the
cordless handset is charging on the handset
charger. The battery is fully charged after
11 hours of continuous charging. For best
performance, keep the cordless handset in
the handset charger when not in use.
Replacing a Cordless Handset
Battery
The cordless handset battery is preinstalled.
To replace the cordless handset battery,
follow the steps below.
1. Use a narrow object to pry open the
handset cover, so that you unsnap the tabs
at the locations indicated below.
2. Place your thumb in the slot below the
battery, and lift the battery out of the
handset battery compartment.
3. Place the top of the battery in the handset
battery compartment so that the battery
connectors are aligned.
4. Push the bottom of the battery down into
the battery compartment.
5. To replace the handset cover, align all
the tabs on the handset cover against the
corresponding grooves on the handset,
then firmly push downward until all the
tabs lock in the grooves.
CAUTIONS
CAUTIONS
There may be a risk of explosion if a wrong
type of handset battery is used. Use only
the supplied rechargeable battery or
replacement battery. To order a replacement,
call +44 (0)1706 694 070 or
email ukca@trustdistribution.com.
Dispose of used batteries according to the
instructions.
EN - 13
Advertisement
Table of Contents
