Swirlpool - Jacuzzi ARGA ARG101C0110 Use & Maintenance

Swirlpool®
activate
the function
stopping
the function
Wait for the tub to be empty before
turning off the main switch. This
ensures the pipes are drained fully.
O
riginal, patented wellbeing. Timeless Swirlpool® technology uses water jets to massage,
stimulate and tone up your whole body. This action involves all areas of muscle, relaxing
and energising them and relaxing your whole body.

Turn on the main switch and wait a few seconds until the start-up process has com-
pleted.

To start the function, press the
finger).
■ Swirlpool® is programmed to run for 20 minutes. After this time, the function stops
automatically.
You can stop it sooner if preferred by pressing the
turned off when you lift your finger).
■ If you do not intend to use the tub again, empty it and switch it off at the main switch.
The tub is fitted with a sensor which prevents the pump from starting if the water level is too
low. If, when you press the button, the pump does not start and the jets and display flash, add
water and press the button again.
The pump stops even when there is an unexpected drop in the water level, caused, for exam-
ple, by somebody getting out of the tub. In any case, once the anomaly (power outage, drop
in water level, etc.) has been resolved, the function can be restarted using the relevant button.
24
button briefly (the function starts when you lift the
button again (the function is