Table of Contents
Advertisement
PARTS
1. Blade set
2. On/Off/Turbo Switch
3. Length adjustment dial
4. Length setting window for 25 - 35 mm
comb
5. Length setting window for 14 - 24 mm
comb
6. Length setting window for 3 - 13 mm
comb
7. Digital display
GETTING STARTED
CHARGING YOUR APPLIANCE
•
Before using your hairclipper for the first time, charge for 1 hour.
•
Ensure the product is switched off.
•
Connect the charging adaptor to the product and then to the mains.
•
If the product is not going to be used for an extended period of time (2 – 3 months),
unplug it from the mains and store.
•
Fully recharge your hairclipper when you would like to use it again.
•
Allow 1 hour for a complete charge.
DIGITAL DISPLAY
•
The device features a digital fuel gauge to show remaining charge and charging status:
During charging:
When the unit is plugged in, the corded indicator icon will
show ( ). With the device turned off and connected to the
charger, the display will light up in a rotating pattern during
charging.
Once charged the display will show 90 and the corded
indicator icon ( ).
4
8. Charger connector
9. 25 - 35 mm comb
10. 14 - 24 mm comb
11. 3 - 13 mm comb
12. Micro fade adjustable comb
Not Shown:
•
Adaptor
•
Cleaning brush
•
Oil bottle
Advertisement
Table of Contents
