Basic Configuration - Omron S8T-DCBU-01 Manual

Basic Configuration

S8TS-06024@
Block Power Supply Basic Block
(Order separately)
Connect to
AC Lines
S8T-BUS01
Bus Line Connector
(Order separately)
Note: S8T-BUS01 Connector is used
for connecting to the
S8TS-06024@ Basic Block.
Number of Multi-Connected S8TS-06024@ and Designated Battery
Area where battery is sold
Overcurrent Max. No. of
protection connected
operating S8TS-06024@
point selector units
5.7 A (typ.) 2 (3 in the case of N+1
redundant operation)
11.7 A (typ.) 4 (5 in the case of N+1
redundant operation)
Note: 1. The designated battery is made by Matsushita (Panasonic).
2. The designated battery is rated at 12 V. Use two batteries in series.
3. S8T-DCBU-01 shall be connected with S8TS-06024@ when in use.
4. Consult Panasonic representative when purchasing batteries.
2
DC Backup Block for S8TS
S8T-BUS03 Bus Line Connector
Note: One S8T-BUS03 Connector is included with the
S8T-DCBU-01 DC Backup Block
Connect to
Loads
S82Y-TS01 Battery Holder
(Order separately)
Japan
LC- LC-
P122R2J P123R4J
Yes Yes
—— Yes
S8T-DCBU-01
S8T-DCBU-01 DC Backup Block.
Connect to
Batteries
Europe
LC- LC-
R122R2PG R123R4PG
Yes Yes
—— Yes
Areas other than Japan
and Europe
LC- LC-
R122R2P R123R4P
Yes Yes
—— Yes