Empire Comfort Systems VFLB36FP30N Installation Instructions Manual page 20

23. Using gloves, unstretch the 6" diameter flex venting from
the SD6DFA25 Flex Vent kit.
Due to sharp edges and the weight of the assembly,
FLEX VENT KIT-SD6DFA25
please use proper eye protection and gloves to reduce
(NOT INCLUDED IN HMFA(36,48,60,72)P KIT)
INCLUDES 25' OF FLEX WITH (2) CLAMPS
the potential for injuries.
FLEX VENT KIT-SD6DFA25
(NOT INCLUDED IN HMFA(36,48,60,72)P KIT)
INCLUDES 25' OF FLEX WITH (2) CLAMPS
BAND CLAMP
SELF DRILLING SCREWS
Page 20
CAUTION
PARTS FROM HMFA FORCED AIR KIT NOT USED
PARTS FROM HMFA FORCED AIR KIT NOT USED
BAND CLAMP
SELF DRILLING SCREWS
(3) PLACES
(3) PLACES
Empire Comfort Systems Inc. • Belleville, IL
24. Measure and cut the Flex-Vent length that runs from
the HMFA-P 6" duct connector installed in step 9 to the
Forced Air Kit Termination.
25. Attach and secure the each end of the Flex-Vent with 7"
diameter gear clamps provided in the SD6DFA25 Flex-
Vent Kit. See Figures 28 and 29.
BAND CLAMP
(INCLUDED IN HMFA
TERMINATION KIT)
BAND CLAMP
(INCLUDED IN HMFA
6" DOVETAIL CONNECTOR
TERMINATION KIT)
(INCLUDED IN HMFA(36,48,60,72)P
VF HEAT TRANSFER KIT)
6" DOVETAIL CONNECTOR
(INCLUDED IN HMFA(36,48,60,72)P
VF HEAT TRANSFER KIT)
6" FLEX
6" FLEX
VENT
VENT
6" DIA 3-WAY
6" DIA 3-WAY
"Y" CONNECTOR
"Y" CONNECTOR
Figure 28
FLANGE, COLLAR
FLANGE, COLLAR
COLLAR
COLLAR
42929-2-0721