Pre-Operation - Campbell Hausfeld Maxus PW2515 Operating Instructions And Parts List Manual

Campbell hausfeld gasoline powered pressure washer operating instructions
Table of Contents

Advertisement

Available languages

Available languages

Pre-Operation

UNPACKING
Remove the equipment and all parts from
the carton. The carton should contain the
following.
One pressure washer (pump, engine,
cart base)
One cart handle assembly
One detergent tank
One spray gun
One lance
One tip holder with 2 spray tips.
Additional tips available for purchase,
see Page 13
One high pressure hose
One pack of nuts, bolts, and manuals
One bottle of engine oil
If any parts are missing, DO NOT RETURN THE UNIT TO THE
RETAILER. Know the unit's model number (located on the
serial number tag on the pressure washer frame) and call 1-
800-330-0712 for replacement parts.
After unpacking the product, inspect it carefully for any
damage that may have occurred during transit. Make sure to
tighten fittings and bolts before using the pressure washer.
Do not operate the unit if it's damaged
WARNING
!
during shipping, handling, or use.
Damage could result in bursting and cause injury or property
damage.
ASSEMBLY
Use two adjustable or 7/16" wrenches to assemble the
pressure washer.
1. Slide the handle assembly over the lower legs of the cart
base. Use the supplied nuts and bolts to secure the handle
to the legs. See
Figure 1.
Figure 1 – Assemble Handle
2. Attach detergent tank to backside of handle. Use the 4 hex
bolts with flat washer under hex head and 4 nuts provided.
3. Slide clear plastic hose attached to leg onto plastic hose barb
of detergent tank (see
Figure
4. Brass Swivel Adaptor (See
attached to the pump inlet, assemble the brass swivel adapter
and attach it to the pump inlet (See
Brass swivel
adapter
Garden hose
Figure 2 - Pump hook up
3).
Figure
2). If it's not already
Figure 4
and
Figure
5). Be
Thermal
relief valve
Pump inlet
Figure 3 – Attach suction tube to barb
fitting
Connect this end to garden hose
Washer
with filter
Connect this end to pump
screen
Figure 4 - Brass swivel adapter
Brass swivel adapter
Pump inlet
Figure 5 - Connect the brass swivel to
the pump
sure to connect the correct side of the brass swivel adapter to
the pump.
5. Secure garden hose (not included) to the inlet connection
on pump.
5
Pressure Washer
Chemical injector
hose barb
High
Pump
pressure
outlet
hose
Washer
www.chpower.com

Advertisement

Table of Contents
loading

Table of Contents