Table of Contents
Advertisement
BUILT TO LAST
Product Manual
Please record Model No. and Serial No. for use when contacting
the manufacturer:
Model No. ______________
Serial No. ______________
For Information About This Product, call 1-800-330-0712
Contents
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety and Warning Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Assembly and Pre-Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Startup, Operation, Shutdown, and Storage . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 9
Maintenance and Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Service Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
High Pressure Soap Lance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Replacement Parts Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 15
• Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
• Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• High pressure soap lance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 - 17
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Carefully read and understand these instructions
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2007 Campbell Hausfeld/Scott Fetzer
Purchase date ____________________
Purchase place ____________________
Model PW2002
before operating your pressure washer.
For parts, product & service information
visit www.chpower.com
Gasoline Powered
Pressure Washers
PW2002 and PW2102
Model PW2102
Page
IN466900AV 5/07
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Campbell Hausfeld PW2002
Summary of Contents for Campbell Hausfeld PW2002
-
Page 1: Table Of Contents
Carefully read and understand these instructions before operating your pressure washer. REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. © 2007 Campbell Hausfeld/Scott Fetzer Gasoline Powered Pressure Washers... -
Page 2: Frequently Asked Questions
WASHER TO THE RETAILER! Where can I buy accessories for my pressure washer? • If you can’t find accessories at the store where you purchased your pressure washer, call Campbell Hausfeld at 1-800-330-0712 or visit our website at www.chpower.com. Who do I call if I have questions or problems? Call Campbell Hausfeld at www.chpower.com... -
Page 3: Safety And Warning Information
ALWAYS turn water supply “ON” before turning pressure washer “ON.” Running pump dry causes serious damage. • Do not operate the pressure washer with the inlet water screen removed. Keep screen clear of debris and sediment. • NEVER operate pressure washer with broken or missing parts. - Page 4 See Figure 1. Figure 1 – Assemble Handle www.chpower.com 2. a. For model PW2002: Attach wire holders to handle and frame as shown in figure 2 using a 3/8" or adjustable wrench. b. For model PW2102: Attach detergent tank to backside of handle.
- Page 5 Pressure Washers Pre-Operation (Continued) Figure 5 – Attach suction tube to barb fitting 4. Brass Swivel Adaptor (See Figure 4). If it’s not already attached to the pump inlet, assemble the brass swivel adapter and attach it to the pump inlet (See Figure 6 and Figure 7). Be sure to connect the correct side of the brass swivel adapter to the pump.
-
Page 6: Surface Preparation
Remember to use the spraying / cleaning techniques mentioned in the following section. Before starting a pressure washer cleaning job, prepare the surface you intend to clean. Clear furniture from the area and make sure that all windows and doors are closed tightly. -
Page 7: Initial High Pressure Rinse
Pressure Washers Operation (Continued) 3. Initial High Pressure Rinse Spray the cleaning surface with water to clear off any dirt or grime that may have collected on the surface. Doing so allows the detergent to attack the deep down dirt that has worked its way into the cleaning surface. -
Page 8: Detergent Application
5. Cleaning Power You can control the cleaning power of your pressure washer in two ways: 1. Adjust the spray pattern at the nozzle. Choose the widest... -
Page 9: Final Rinse
LONG TERM STORAGE INSTRUCTIONS (MORE THAN 30 DAYS IN STORAGE) 1. Remove fuel from the tank and run the pressure washer in a normal operating mode until the engine stops from a lack of fuel. Normal operating mode means actually spraying water from the gun while the engine is running. - Page 10 If oil has leaked out of the pump, bring the pressure washer to a certified Campbell Hausfeld service center for repair. 1. Oil fill tube 2.
-
Page 11: Service Record
Pressure Washers Maintenance (Continued) Service Record Date Maintenance performed Replacement components required www.chpower.com... - Page 12 For Replacement Parts, Call 1-800-330-0712 Please provide following information: - Model number - Serial number (if any) - Part description and number as shown in parts list Address parts correspondence to: Campbell Hausfeld Attn: Customer Service 100 Production Drive Harrison, Ohio 45030 Ref. Part...
- Page 13 1/4” - 20 Bolt (tank) Detergent tube O-ring (gun) Hose Lance, Hi / Low Adj Fan Lance, Turbo Lance, High PSI Soap Tank Item available at local hardware store. Product PW2002 PW2102 Number PM345104BH PM001902AV PM002000AV ST073808AV PM001902AV PM345102BH PM345101BH AL062300AV...
-
Page 14: High Pressure Soap Lance
Description The High Pressure Soap Lance is an accessory that connects to the gun of your pressure washer. With this device you can spray liquid soap at high pressure from a tank conveniently attached to the lance, or you can spray soap at low pressure from the existing soap injection system on your pressure washer. -
Page 15: Replacement Parts Lists
Pressure Washers High Pressure Soap Lance High Pressure Operation 1. Make sure pressure washer is running. 2. Rotate indicator on cap to the “On” position to apply soap (Figure 4). Figure 4 3. Pull back on black nozzle to ensure lance is in high pressure mode (Figure 5). -
Page 16: Troubleshooting Chart
Pressure Washers Troubleshooting Chart - Gasoline Powered Pressure Washers Only Symptom Possible Cause(s) Engine will not start or is No gasoline in fuel tank or carburetor hard to start Low oil Start/Stop switch in stop position Water in gasoline or old fuel Dirty air cleaner filter Spark plug dirty, wrong gap or wrong type Spray gun closed... -
Page 17: Troubleshooting Chart
Push nozzle forward as far as it will go. If clean, unkink or replace hose. Use only hose length provided with initial pur- chase of pressure washer. Detergent suction will not function if more than once section of hose is attached to unit. - Page 18 Pressure Washers Notes www.chpower.com...
- Page 19 Pressure Washers Notes www.chpower.com...
-
Page 20: Warranty
Limited Warranty 1. DURATION: From the date of purchase by the original purchaser as follows: One Year 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, OH 45030, Telephone: (800) 330-0712 3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell Hausfeld pressure washer.