Table of Contents
Advertisement
8. DIRECT MONITOR – this switch routes the inputs directly to the outputs with three different
settings: OFF, MONO and STEREO. When set to OFF, monitoring of input sources is via the
DAW; in MONO or STEREO, monitoring is taken directly from the preamp inputs so is free of
any latency. The symbols
modes respectively. When Direct Monitor is on, the signal is combined with software playback.
9.
Headphone level – adjusts the output level at the front panel stereo headphone output.
10.
Headphone socket – ¼" TRS output jack. If your headphones have a ¼" TRS
jack plug, connect them directly; if they have a 3.5 mm TRS "mini jack", use a
TRS ¼"-to-3.5 mm jack adaptor. Note that headphones fitted with 4-pole TRRS plugs will not
operate correctly.
Back Panel
11
11. K (Kensington security lock) – secure your Scarlett 2i2 to a suitable structure if desired.
USB 2.0 port – Type C connector; connect to your computer with cable supplied.
12.
13. LINE OUTPUTS: LEFT and RIGHT – 2 x ¼" (6.35 mm) TRS jack sockets; +10 dBu output level
(variable), electronically balanced. Either ¼" TRS (balanced connection) or TS (unbalanced
connection) jack plugs can be used.
16
or
12
illuminate green to indicate selection of mono and stereo
RIGHT
LEFT
13
Advertisement
Table of Contents
